EasyGen 3000XT Series news!

 

Equipped with enhanced and powerful features, the new easYgen-3000XT series has the same form and
fit as the previous generations to easily slip into your current and future control panel. All functions of the
easYgen-3000XT are backward compatible so they can synchronize, load share, and perform load dependent
starting and stopping as needed.

Leaflet for easYgen 3500/3400XT Here

Leaflet for easYgen 3200/3100XT Here

Technical manual for easYgen 3000XT series Here

 

easYgen-3000 Series

The easYgen-3000 Series is an exceptionally versatile genset control and protection package with all the
flexibility and features needed to fit a wide range of power generation applications. It allows the user to
standardize on a single, affordable control for many uses – from standalone emergency generators to
isochronous parallel operation of up to 32 gensets. Common applications include emergency standby,
cogeneration, marine ship/shore power, island prime power or utility paralleling with peak shaving, and
import/export control.

Leaflet for easYgen 3100-3200 Here

Leaflet for easYgen 3400-3500 Here

Technical manual for easYgen 3100-3200 Here

Technical manual for easYgen 3400-3500 Here

 

easYgen-2000 Series

The easYgen-2000 Series is a compact, affordable genset control and protection package for load sharing
up to 16 gensets in island operation, or parallel operation of a single unit with a utility. Its integrated
load-dependent start/stop programming allows you to define how gensets are brought on- and off-line to
support changing load demands. It even works with a mix of different sized engines, so you can maintain
the spinning reserve you need while optimizing fuel efficiency

Leaflet for easYgen 2000 Here

Technical manual for easYgen Here

 

easYgen-1000 Series

 

The innovative features of the easYgen-1000 Series, including flexible breaker configuration and start/
stop logic, real and reactive power sensing, and remote-start capability make it the intelligent choice for
specialized mobile power and emergency standby applications.

Technical manual for easYgen 1000 Here

 

easYgen-300 Series

The easYgen-300 Series are affordable, value-packed genset controllers for auto-start and transfer
switch operations. They provide all the essential functionality for standby diesel genset applications with
monitoring, protection, and event recording options common to high-end controls.

 

Leaflet for easYgen 300 Series Here

 

LS-5 Series

 

 

The LS-511/521 circuit breaker control and protection device is designed to enable complex
power management applications with multiple segments and bus breakers in combination with
easYgen-3400/3500-equipped genset controllers. The LS -5 devices manage synchronization,
loading and unloading on each bus segment, and send the required voltage and frequency
references via CAN bus to the easYgen-3400/3500 genset controllers. It can be used as a
sync-check relay in stand-alone mode without easYgens.

Leaflet for LS-5 Here

 

RP-3000XT news!

 

Woodward’s RP-3000XT is a touch screen remote control and annunciation panel for use with
the easYgen-3000XT series controls. It is particularly useful with the back panel mounted
easYgen-3100XT /3400XT , providing control from the front panel with greatly reduced wiring to
the access door, while keeping high voltage connections located safely on the back panel.

Leaflet for RP-3000XT Here

 

easYlite-100

The easYlite-100 is designed to remotely display the status of a generator control system through
a CAN BUS Interface. The easYlite-100 may be used where an additional status display is required,
which is directly controlled by the generator control unit.

 

Leaflet for easYlite 100 Here

 

IKD-1

 

The IKD 1 is an I/O expansion board. It allows an additional eight discrete inputs and eight relay
outputs to be connected via CAN bus to the Woodward generator set controllers series GCP -30
and easYgen. It is possible to connect multiple IKD 1 cards to each of the genset controllers.
The IKD1 will be programmed via a PC configuration tool. Configuration of text name for the I/O,
alarm classes, Normally Open (NO ) and Normally Closed (NC ) relay contact configuration and
delay timers are possible. The I/O will be displayed in clear text messages on the genset controllers
HMI and can be used for further processing

Leaflet for IKD-1 Here

 

LSG

The Load Share Gateway (LSG) is a communication converter specifically designed to operate
the easYgen-2000 / easYgen-3000 Series and any other industrial legacy devices in a load share
network. You are able to connect any analog load share controller to the easYgen genset controllers.
This feature supports you for retrofit business by expanding your existing load share technology
by our genset controller lines. Due to the flexibility in our software you are also able to
maintain basic-load-dependent start/stop sequences, if needed.

Leaflet for LSG Here